Tuesday, 23 April 2013

Updates, updates.

Well, since I posted in February, I have been busy. There were birthdays, a couple of rounds of colds, assignments to finish and my IVF cycle crashed and burned. I am trying again shortly. As regards my house, though, mostly I have just been thinking. Fiddling with the floorplan, working out how furniture would go, checking on A/C requirements. Also second guessing myself and checking out other floorplans; I have a short list of second-place plans but nothing has quite managed to topple to Marina41 from it's place as my favourite.

So, since I'm sure anyone reading is wondering what my changes have narrowed down to, here is a pic of what I'm wanting:

my modified Marina 41

The biggest changes (all involving changing the footprint of the house):
  • Extend garage to boundary (~ 2m), lengthen the side section and put in a rear garage door. Widen main garage door. Also, possibly raise the height of the garage to ensure safe access for a high vehicle (people mover) considering there will be a fairly steep driveway sloping down from the street.
  • Add a studio + alfresco of ~ 2m depth at the back, with a 5door stacking cavity slider from Dining to Studio and stacker sliding glass doors from the Family to the Alfresco.
  • Widen house along master WIR and Bedroom - call it a 'grand master' option. Exact widening to be determined, but will allow double-sided hanging space in the WIR. The theoretical max would be ~ 800mm, as it is designed to have a 1800 from that side to the boundary, and 1000 to the boundary is the estate minimum unless you go all the way to zero, which I cannot since I am doing that on the garage side. However, engineering restrictions relating to the fact my block slopes and the need for gutters and so on must be taken into account.
Window mods - downstairs changes not on the plan, upstairs are.
  • Add north facing windows to Family room.
  • Delete window in Games room and replace with a french-door + ~1200 from floor window.
  • Change master bed windows to single high window.
  • Delete west facing windows to Beds 2 & 3 and add north and south facing windows respectively.
  • Add north facing windows to Games room.
Internal modifications as follows:
  • Convert second master WIR (that was accessed via Ens.) to a Coat cupboard but removing the opening to the ensuite and adding a door from the hallway. Network cabling to converge here.
  • Delete fridge space from the pantry and add it to corner of rumpus room.
  • Move sink to bench beneath the kitchen window. Move dishwasher to suit.
  • Change from under-bench oven to wall oven.
  • Probably adjust location of doorway to rumpus to where I want to put furniture.
  • Add doors from entry to hall, in line with garage/rumpus wall and end wall of stairs/void.
  • Combine 2way bath to main bath option with standard option to provide 2way access to bed 5 only.
  • Widen upstairs WC by reducing the linen cupboard/linen cupboard doors as required. (provide capped hot/cold/waste water to WC for post-handover wall basin. 
  • Modify standard bath2 option B by moving the robe to Bed3 along to take space equally form beds 3 & 4.
  • Modify standard bath2 option B by converting bed 2 robe to a WIR with double sliding doors.
  • Take space from bed 2 WIR and add plaster-framed against family room wall below as a second return-air path for air-conditioning unit.
  • Add wall to Games room in line with external void wall, including 820/520 double doors.
  • Add a second linen cupboard along new wall to Games room with triple sliding doors.
Other points that don't show up on plans will include roof trusses designed to allow the installation of the ducted reverse-cycle unit. I want to have a third party install the a/c since I don't like their standard options and I have found a company that have worked with PD on builds before. Hopefully it can be negotiated to my satisfaction. Also, I want skirting installed upstairs (which will all be carpeted) but not downstairs (all cork tiles); wet areas are to get *tiled* 'skirting', I want an extraction fan vented to the outside added to the coat cupboard as I'll have media center/networking/server equipment in there. I wouldn't bother but it is too hard to add afterwards! I want light/fan in the WC/PR on separate switches, thank-you-very-much. I also wish to upgrade to 2590 height ceilings (middle of the three ceiling heights offered) throughout.

I will certainly be putting in extensive network cabling and will be looking at cbus options too as I would love to do some automation as well. And I'm sure I will want more powerpoints and extra switches for lights, although very few locations will get downlights as I don't like them very much. (Most likely, pantry, coat and store room will be the only downlights!)

Next week (I think) I'll finally get a chance to drop it on the head of my sales contact.




I dropped by Timbertop's sales office today to take another look at my block. They've got as far as demolishing the old farmhouse and they have pegged out blocks in the Boutique (2A) release. They haven't done stage 2, probably because more earthworks are needed. But, as 2A borders stage 2, I was able to work out much much more precisely where my block is. So, standing in what will one day be Renishaw Drive, here is my future chunk of dirt:

It's a lovely pile of scrap metal, isn't it?

Matters are still on track for my block to title in October so I will keep on believing I will see a site-start before Christmas!

2 comments:

  1. Hi Kati, love the changes you have made to you plans. We also opted for the 2m extension to the garage. Have just had our slab poured and the contractors have commented how big it is. I love it, plenty of storage room planned and being able to open car doors.
    Love where you have moved your sink, makes sense.
    One thing to check with PD is any changes to the Bathrooms. You may have this covered off. I managed to get a change to an ensuite design signed and approved last year, but apparently as of Jan 2013 they weren't allowing any changes to the Wetrooms unless their designs. I was discussing moving the shower and bathroom design around within the current bathroom and told No. Just wanted to alert you in case you weren't aware of this. Perhaps if you are adding in a whole new ensuite this would be Okay. Hope it works for you as it looks great.
    All the best, October will be here before you know it!

    ReplyDelete
  2. Oooh, dont I know it about bathrooms! No need to worry to much this time though; my only non standard bathroom wish is to the upstairs bathroom - instead of the standard vanity location, I want the vanity/ensuite-access standard-option for bed 5. As opposed to the entire bed 4/5 shared ensuite standard-option that is. The rest is just their regular spa-to-master ensuite and ensuite-to-beds-2/3-version2 options. ;) I got the engineering drawings for those options, thanks to my wonderful sales rep! I would prefer a rectangular bath instead of corner one to the master but meh. There are limits. As you say, they don't like changing wet areas; almost none of the builders will do so in fact. I think, though, that I will make sure I have plenty of extra tiles for the master ensuite so that maybe it can be improved someday.

    ReplyDelete