Tuesday, 23 April 2013

Updates, updates.

Well, since I posted in February, I have been busy. There were birthdays, a couple of rounds of colds, assignments to finish and my IVF cycle crashed and burned. I am trying again shortly. As regards my house, though, mostly I have just been thinking. Fiddling with the floorplan, working out how furniture would go, checking on A/C requirements. Also second guessing myself and checking out other floorplans; I have a short list of second-place plans but nothing has quite managed to topple to Marina41 from it's place as my favourite.

So, since I'm sure anyone reading is wondering what my changes have narrowed down to, here is a pic of what I'm wanting:

my modified Marina 41

The biggest changes (all involving changing the footprint of the house):
  • Extend garage to boundary (~ 2m), lengthen the side section and put in a rear garage door. Widen main garage door. Also, possibly raise the height of the garage to ensure safe access for a high vehicle (people mover) considering there will be a fairly steep driveway sloping down from the street.
  • Add a studio + alfresco of ~ 2m depth at the back, with a 5door stacking cavity slider from Dining to Studio and stacker sliding glass doors from the Family to the Alfresco.
  • Widen house along master WIR and Bedroom - call it a 'grand master' option. Exact widening to be determined, but will allow double-sided hanging space in the WIR. The theoretical max would be ~ 800mm, as it is designed to have a 1800 from that side to the boundary, and 1000 to the boundary is the estate minimum unless you go all the way to zero, which I cannot since I am doing that on the garage side. However, engineering restrictions relating to the fact my block slopes and the need for gutters and so on must be taken into account.
Window mods - downstairs changes not on the plan, upstairs are.
  • Add north facing windows to Family room.
  • Delete window in Games room and replace with a french-door + ~1200 from floor window.
  • Change master bed windows to single high window.
  • Delete west facing windows to Beds 2 & 3 and add north and south facing windows respectively.
  • Add north facing windows to Games room.
Internal modifications as follows:
  • Convert second master WIR (that was accessed via Ens.) to a Coat cupboard but removing the opening to the ensuite and adding a door from the hallway. Network cabling to converge here.
  • Delete fridge space from the pantry and add it to corner of rumpus room.
  • Move sink to bench beneath the kitchen window. Move dishwasher to suit.
  • Change from under-bench oven to wall oven.
  • Probably adjust location of doorway to rumpus to where I want to put furniture.
  • Add doors from entry to hall, in line with garage/rumpus wall and end wall of stairs/void.
  • Combine 2way bath to main bath option with standard option to provide 2way access to bed 5 only.
  • Widen upstairs WC by reducing the linen cupboard/linen cupboard doors as required. (provide capped hot/cold/waste water to WC for post-handover wall basin. 
  • Modify standard bath2 option B by moving the robe to Bed3 along to take space equally form beds 3 & 4.
  • Modify standard bath2 option B by converting bed 2 robe to a WIR with double sliding doors.
  • Take space from bed 2 WIR and add plaster-framed against family room wall below as a second return-air path for air-conditioning unit.
  • Add wall to Games room in line with external void wall, including 820/520 double doors.
  • Add a second linen cupboard along new wall to Games room with triple sliding doors.
Other points that don't show up on plans will include roof trusses designed to allow the installation of the ducted reverse-cycle unit. I want to have a third party install the a/c since I don't like their standard options and I have found a company that have worked with PD on builds before. Hopefully it can be negotiated to my satisfaction. Also, I want skirting installed upstairs (which will all be carpeted) but not downstairs (all cork tiles); wet areas are to get *tiled* 'skirting', I want an extraction fan vented to the outside added to the coat cupboard as I'll have media center/networking/server equipment in there. I wouldn't bother but it is too hard to add afterwards! I want light/fan in the WC/PR on separate switches, thank-you-very-much. I also wish to upgrade to 2590 height ceilings (middle of the three ceiling heights offered) throughout.

I will certainly be putting in extensive network cabling and will be looking at cbus options too as I would love to do some automation as well. And I'm sure I will want more powerpoints and extra switches for lights, although very few locations will get downlights as I don't like them very much. (Most likely, pantry, coat and store room will be the only downlights!)

Next week (I think) I'll finally get a chance to drop it on the head of my sales contact.




I dropped by Timbertop's sales office today to take another look at my block. They've got as far as demolishing the old farmhouse and they have pegged out blocks in the Boutique (2A) release. They haven't done stage 2, probably because more earthworks are needed. But, as 2A borders stage 2, I was able to work out much much more precisely where my block is. So, standing in what will one day be Renishaw Drive, here is my future chunk of dirt:

It's a lovely pile of scrap metal, isn't it?

Matters are still on track for my block to title in October so I will keep on believing I will see a site-start before Christmas!

Monday, 11 February 2013

Hopetoun Interiors, take 1 continued.

Apologies to anyone who is trying to get a good view of any photos - I was just using the camera in my phone.

Moving on from bricks and windows, I was pleased to note that my current choice of front door is shown. From the Corinthian doors website...



... it is the "PMAD101", so the "Madison" range with "Slumped Waterfall" glass. It was the glass which made the choice, really, since I just adore the look of slumped glass. The position/shape of the glass also complements the internal doors I have taken a fancy to:


... which are the Deco3, not visible in the Hopetoun display but shown in several displays. Then to go with the doors, one needs handles and/or locks. There is not a lot of choice here - the front door locksets on display were two styles, a knob in satin or chrome and a lever handle on a plate. There is an addition deadlock in round or square. I prefer the lever and am considering the keyless option for it. You can just see a little of the lever lockset on the edge of the next picture, which was mostly taken to show the internal handles:


The long handle in the middle is an entrance door pull I believe, the knobs below are for wardrobes/linen. Next picture is a composite of the standard door handles on the right hand side with their corresponding privacy version on the left, with some variation in the satin/chrome finish.


I'm inclined towards the bottom one but doorhandles are comparatively so easy to switch out that I can't get worked up about them. There is no door knob option on display, only levers.

Next station around the room was the kitchen cupboards, benchtop and splashback options. I only had a cursory look at the cupboard - they showed quite a collection of laminate of different types, some vinyl wrap and 3 solid timber options. The colour chips were from Laminex and Formica but only a subsection of the range was shown - and some spots had no loose chips and a note saying they could not be selected. I saw enough to be sure I could find an acceptable combination and left the cupboard doors alone. Next I looked at the benchtops; they had Essastone, Caesarstone, marble and granite samples to look at. It was good to see them in person although I was left a bit confused about categories. They were labeled, yes, but there was a stray comment about changing from Caesarstone to Essastone and therefore I wasn't sure if the cat-1 caesarstone would continue to be an option. In either case, I found some I liked. I also asked about 2pac paint doors and was assured that was also an option, even though they are not displayed.

Here is the caesarstone - amusingly, as well as being cat 1 then 2 and then 3, they are my first, second and third caesarstone choice in that order as well. This is taken from the Caesarstone website - the samples look quite different in person.


And here is the Essastone, also taken from their website. I prefer the cat 4 Dusk to the cat-2 Crystal Salt but I like both.


I had several others on my list to look at but either they weren't there or I didn't like them in person. They had a little display of glass splashback samples but I almost ignored them since there wasn't only a handful of colours - the only point to note was the difference between regular glass and starfire glass. I had a quick look at cupboard door handles, noting that I didn't much like the standard, the first level upgrade were marginal and a few of the expensive ones were nice. Meh.

From here, I skipped the cornice display (I really could care less, at least right now) and had a quick look at the standard Lifestyle toilet:


I quite like it so no issues there.

Next was vanity basins, here is the standard:

It is ok, but I do prefer this upgrade:





The other upgrade basin options were square/rectangular and thus not to my taste.


Here is the shower rose currently offered to the master ensuite as part of a promo, with enough of the standard shower rose in the corner to get an idea - the standard is a ye-basic shower rose.





And here is the standard laundry taps:





All quite inoffensive if not at all exciting. My main thought if whether I want taps or a mixer; one mixer can usually be swapped easily after handover for another, but if three holes have been drilled in the tiles, it is much harder to swap to a mixer, or vice versa.


I glanced at the kitchen sink, the standard overmount option is fine but I would prefer an undermount - an upgrade and none visible to look at.

Otherwise, I checked on a few other details. Wattyl paint is non-negotiable and they'd rather you used Wattyl colours. I also asked about staircase choices since they have very little at HI about it; they do have a folder showing photos from display homes which they showed me, but I think I will have to make sure I check staircases when I go back to displays and go from there. The flooring and carpet I dismissed; I don't like any of it so post-handover it will be.


There is a tiny electrical showroom open for viewing, although the main electrical selection office is closed on the weekend, and I picked up a few details about the networking/home theatre etc packages offered by Argus Technologies.

This morning, I swung by the nearest paint shop that has Wattyl paint (Bunnings does not... of course.) and collected a bunch of chips for possible wall colours. My next step for colours will be to decide on my main timber flooring and carpet colour. Then from there, I will co-ordinate the walls and wet-area tiles, then the kitchen colours.

But before I get too involved in that, I must finalise my structural change requests. Really, I have seen enough of the selections to have a decent idea of what I can choose from and what I need to research; it can all go on the mental back-burner for a while. :)

Sunday, 10 February 2013

Hopetoun Interiors, take 1

Since Hopetoun is open for browsing on Saturday and Sunday, I thought it worth while to go and take a look and confirm what kind of range I get to choose from. It was interesting! There was quite a few people there, of course, but there was still plenty of space to study colours and options. The staff took the time when I arrived to point out the standard ranges, although obviously not the cost for upgrades. Well, almost - they did mention that the first group of upgrade cabinet handles was $7 per handle and the second group was 'up to $45 per handle'.

And so onto what I suspect is a very frequent rant. Brick choices! As the Marina is a Lifestyle build, I am stuck with Boral bricks. Now, there are some very nice Boral bricks but I was looking for a light coloured brick that was -not- orange or pink toned.


Yeah right. Boral does some lovely red bricks but the cream-selection offered by PD is dismal. Dismal! The only cat-1 light coloured choice is much too orange and it really isn't until you get to La Mesa (cat-6) that you find a light coloured brick without a golden, orange or pink tone.

If you walk around the wall and take a peek at the Austral brick choice for the Prestige range...


then there is a whole bunch of lovely light coloured bricks. Cat-1 Parchment (second nearest on the top row in the picture) would have been just fine... or cat-3 Ivory would have been perfect.
But noooooo. PD administration can't cope with offering Austral to Lifestyle clients. Or the reverse - the HI staff member said ruefully that plenty of Prestige clients who wanted a red-toned brick would be so much happier if they could choose from the Boral collection. *growls and stomps feet and prays they will change this before I have to choose a brick*

Anyhow, I narrowed my choices in the Boral range to the following four:

Horizon Naturals - "Brown Terrain" (category 2)

Horizon Riverside - "Sandy Beach" (category 2)

Elan Gallery - "Eaglemont" (category 4)

Elan Signature - "La Mesa" (category 6)

Two darker, two lighter; I'm most iffy on Sandy Beach because it really is too gold-toned. Still, I will take a look at a larger wall done in it just to be sure. Eaglemont is gorgeous but I fear it might be overwhelming in too large an area so I want to see it 'en mass' as well. La Mesa I am sure I like but category 6 might be just too expensive and Brown Terrain is nice enough but rather boring.

Then I took a look at render. There was approximately 75 colours of render on display but in my opinion, it skewed to the light colours. There was very little dark to very dark. See here for a glimpse:






Most of the colours that look dark against the white background given to all the sample look only moderately dark when held against a brick; there was also at least a dozen 'white' renders that I could barely distinguish and a similar number of 'off white'. They were mostly Dulux colours. I did find a colour called "Russian Toffee"...
... which I liked with all my brick choices.

Window frame colours are curiously distributed right now - here is a picture:


I have no idea yet which one I would want; I'll wait until I have settled on a brick choice.

I have more to say and document but it's late and I need to sleep; I'll post about all the rest of my visit tomorrow.

(edited to fix a typo. *sigh*)



My proposed changes to the Marina 41

This is my current draft:


including my messy scribble notes. I haven't recorded added doors. An alternative with the Studio is to only extend it across as far as the Dining/Laundry wall, so to avoid having to move anything in the laundry. I go back and forth on this - the final choice may be dictated by how willing they are to change the laundry. They do have standard variations which are alfrescos tacked on the back of a house, and it's not uncommon for them to have a media/alfresco rear extension so it is likely (I was told) that my version can be done.

I will finalise my proposed changes soon and forward a PDF to my sales contact so he can see what they will do.

Saturday, 9 February 2013

Switching house plans!

Subsequent to my last post, everything is indeed signed and initialled and I have my copy of the contract with both original signatures & initials.

Yay!

Now, back to house plans. For a variety of reasons, my budget gave me pause for a moment and so I stepped back and just rechecked other plans... again. And I found the one I missed! (of course) This turned out to be the Marina41 from the Lifestyle range at Porter Davis. I was familiar with the Marina42 of course, and had seen it on display ages ago, and when I thought of 'smaller Marina', I of course thought of the Marina35, a now discontinued version that was mostly just a shrunken 42. The 41, however, has been neatly redesigned to suit the 14m width block. Here it is:


 Specifically, the position of the Rumpus so as to maximise use of the north facing aspect of my block into living areas. The laundry is also ideally positioned to suit where I want to put my clothesline and the study at the front can be used as an office for my future home business.

The main negative is lack of study/studio at the back for my use as a sewing & craft room. And the master bedroom is a little smaller than I'd like, and the positions of the master WIRs is a little awkward.

Here the plan is again, this time with standard variations:
  1. Spa to master ensuite.
  2. Shared ensuite to 4th & 5th bedrooms. (and regrettably, loss of a window to the WC).
  3. Shared ensuite to 2nd & 3rd bedrooms. (reduced robe/WIR space).



(Photoshopped from image of standard plan.)

I wouldn't be finished here though. I can see several things which I would want to tweak - here is a quick list:

  • Add a full width studio/alfresco extension on the back, approximately 2-2.5m in depth. Along with that, move the laundry door to the south facing wall and move the sliding door in the dining room to the location of the family room window.
  • Add north facing windows to the Family and Games rooms. Convert Rumpus room window to sliding doors.
  • Redo the robe for bed 2 to provide a WIR and WIL (taking a bit extra from the Games room in the process).
  • Move the kitchen sink - either along a little to be behind the store wall or move it to beneath the window.
  • Reduce the fridge space in pantry from 1000mm to 800mm, designating it as a 'freezer' space (for my upright freezer) and add a new fridge space out of the corner of the rumpus room, thus avoiding the need for people grabbing a drink from the fridge to walk through my kitchen.
  • Add doors to study, rumpus, ensuites, WIRs, etc.

It's a much shorter list than I had with the Sandringham and that by itself makes it much more likely I will get everything how I want it. Of course, the Prestige range does have a better set of inclusions - so there will be more upgrade costs by going with a Lifestyle build. *sigh* On the other hand, starting from nearly $50,000 lower does provide a lot more wriggle room on my budget for said upgrades!

Right now, I'm finalising in my mind what structural changes I want so I can give my sales contact a PDF of them for him to present to the relevant PD department and request approval. I have hunted through all the floor plans I can find and can't find anything else as close to what I want as this so while I do not intend to move fast on signing the tender and contract, I'm happy enough to keep moving.

Tuesday, 29 January 2013

Mine! Mine, Mine, Mine!

I just got the news that I have a counter-offer; it's great, just a touch higher than my offer and quite acceptable to me so I will be paying the rest of the deposit and counter-signing the amended contract this afternoon.


 
It's all MINE!


Saturday, 26 January 2013

Waiting waiting waiting...

I had hoped the developer would come back with an answer to my offer before today, but no, he has told the sales rep that he is 'thinking about it' and will respond after the long weekend.

On the one hand, he hasn't rejected it!

On the other hand, sounds like it'll be a counter-offer for me to consider.

Hmmmmmmmm.

Today, I went with my sister to visit the display homes in Grandvue. In particular, my sister wanted to see the Porter Davis Montague (Access range), since it is one of her top plans for her own eventual build. It was certainly interesting - the Access homes on display were decidedly nicer than the first Access ones I saw, about 2-3 years ago. The standard options are great as well; they really do take into account a lot of what makes a house plan flexible enough to suit many different people. And both the Montague and the London are very liveable plans. Too small for what I want but were I not so attached to my stuff and space...

But I am attached to my stuff and space so moving right along, I also took the chance to take a look at the Dennis Family display there: the Riverton 371. The Riverton isn't on my short list of plans but the quality of the finish was very nice indeed. I did stop and chat with the sales reps and picked up their floorplan booklet and pricelist. I can see an adapted Balmoral, Atherton or Churchill working quite nicely on my block.

A good part of my decision about which house to build will be dependent on the results of my IVF cycles. I have one frozen embryo and I am about to start a cycle to transfer it. If that doesn't work, I plan to do one more stim cycle but no more before revisiting my decision to try and have another child. In my gut, I don't feel my family is complete yet, but if my IVF fails, then I have only my twins and frankly, the house size that we would realistically fill is less than if I have another one or two  children.

Of course, I might have another embryo split in two and give me another set of twins. And if an embryo was excessively enthusiastic, it could even split into three... no. I'm not even going to imagine that scenario!